Cisco WAP351-E-K9 Wi-fi Точка доступа Wireless-N 2,4 и 5,0GHz (одновременная работа) Secure Busi

SKU:: WAP351-E-K9
brand:: CISCO
availability:: no

13440 uah
$320

Cisco WAP351-E-K9 Wi-fi Точка доступа Wireless-N 2,4 и 5,0GHz (одновременная работа) Secure Business-class AP

Specifications Description Photo Reviews ()

Specifications for Cisco WAP351 Wireless Access Point

Specifications	Description
Standards	IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type	Category 5e or better
Antennas	Internal antennas optimized for installation on a wall or ceiling
LED indicators	Power, WLAN, LAN
Operating system	Linux
Physical Interfaces
Ports	5 10/100/1000 Ethernet, with support for 802.3af /at PoE, Power Port for AC adapter (not included)
Power Supply	802.3af/at PoE and External 48V/1.25A DC power adapter (not included)
Buttons	Reset button, Power On/Off
Lock slot	Slot for Kensington lock
Physical Specifications
Physical dimensions (W x D x H)	9.055 x 9.055 x 1.575 in. (230 x 230 x 40 mm)
Weight	1.34 lb or 0.607 kg
Network Capabilities
VLAN support	Yes
Number of VLANs	1 management VLAN plus 16 VLANs for SSIDs
802.1X supplicant	Yes
SSID-to-VLAN mapping	Yes
Auto channel selection	Yes
Spanning Tree	Yes
Load balancing	Yes
IPv6	Yes ● IPv6 host support ● IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2	802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN
Security
WPA/WPA2	Yes, including Enterprise authentication
Access control	Yes, management access control list (ACL) plus MAC ACL
Secure management	HTTPS
SSID broadcast	Yes
Rogue-access-point detection	Yes
Mounting and Physical Security
Multiple mounting options	Mounting bracket included for easy ceiling or wall mounting
Physical security lock	Kensington lock slot
Quality of Service
Quality of service (QoS)	Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS
Performance
Wireless throughput	Up to 300-Mbps data rate (real-world throughput will vary)
Recommended user support	32 active clients/users per radio
Multiple-Access Point Management
Single Point Setup	Yes
Number of access points per cluster	8
Active clients per cluster	240
Configuration
Web user interface	Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Management
Management protocols	Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management	Yes
Event logging	Local, remote syslog, email alerts
Network diagnostics	Logging and packet capture
Web firmware upgrade	Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)	DHCP client
IPv6 host	Yes
HTTP redirect	Yes
Wireless
Frequency	Dual concurrent radios (2.4 and 5 GHz)
Radio and modulation type	Dual radio, orthogonal frequency division multiplexing (OFDM)
WLAN	802.11n 2x3 multiple-input multiple-output (MIMO) with 2 spatial streams on 2.4 GHz 2x2 multiple-input multiple-output (MIMO) with 2 spatial streams on 5 GHz 20, and 40 MHz for 802.11n PHY data rate up to 600 Mbps
Data rates supported	802.11a/b/g: ● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps ● 802.11n: 6.5 to 300 Mbps ◦ 20-MHz bandwidth: MCS 0-15 for supported data rates ◦ 40-MHz bandwidth: MCS 0-15 for supported data rates
Frequency band and 20-MHz operating channels	A Regulatory Domain: ● 2.412 to 2.462 GHz; 11 channels ● 5.180 to 5.240 GHz; 4 channels ● 5.745 to 5.825 GHz; 5 channels	E Regulatory Domain: ● 2.412 to 2.472 GHz; 13 channels ● 5.180 to 5.240 GHz; 4 channels C Regulatory Domain: ● 2.412 to 2.462 GHz; 11 channels ● 5.745 to 5.805 GHz; 4 channels
Nonoverlapping channels	2.4 GHz ● 802.11b/g ◦ 20 MHz: 3 ● 802.11n ◦ 20 MHz: 3 5 GHz ● 802.11a ◦ 20 MHz: 9 ● 802.11n ◦ 20 MHz: 9 ◦ 40 MHz: 4
Wireless isolation	Wireless isolation between clients
External antennas	None
Internal antennas	Internal Fixed PiFA Antenna
Antenna gain in dBi	Maximum antenna gain of 5.3 dBi on 2.4 GHz Maximum antenna gain of 5.1 dBi on 5 GHz
Wireless distribution system (WDS)	Yes
Roaming	802.11i only
Multiple SSIDs	16
Wireless VLAN map	Yes
WLAN security	Yes
Wi-Fi Multimedia (WMM)	Yes, with unscheduled automatic power save
Operating Modes
Access point	Access Point mode, WDS Bridging, Workgroup Bridge mode
Environmental
Power options	IEEE 802.3af/af Ethernet switch Cisco Power Injector - SB-PWR-INJ2-xx AC Adapter - SB-PWR-48V-xx (not included) PoE power: Peak PoE power: 18W
Compliance	Safety: ● UL 60950-1 ● CAN/CSA-C22.2 No. 60950-1 ● IEC 60950-1 ● EN 60950-1 Radio approvals: ● FCC Part 15.247, 15.407 ● RSS-210 (Canada) ● EN 300.328, EN 301.893 (Europe) ● AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B): ● FCC Part 15.107 and 15.109 ● ICES-003 (Canada) ● EN 301.489-1 and -17 (Europe)
Operating temperature	0° to 40°C (32° to 104°F)
Storage temperature	-20° to 70°C (-4° to 158°F)
Operating humidity	10% to 85% noncondensing
Storage humidity	5% to 90% noncondensing
System memory	128-MB RAM 128-MB Flash
Package Contents
● CiscoWAP351 Wireless-N Dual Radio Access Point ● Ceiling-/wall-mounting kit ● User guide on CD-ROM ● Quick-start guide ● Ethernet network cable
Minimum Requirements
● Switch or router with PoE support, PoE injector, or AC Power Adapter ● Web-based configuration: Java-enabled web browser
Warranty
Access point	Limited lifetime

Cisco WAP351 Wireless-N Access Point RF Performance Table

	Maximum Transmit Power (dBm) Per Chain	Receiver Sensitivity (dBm) Per Chain
2.4 GHz – 802.11b
1 Mbps	17.0 +/- 1.5	-91.0
11 Mbps	17.0 +/- 1.5	-89.0
2.4 GHz – 802.11g
6 Mbps	17.0 +/- 1.5	-93.0
54 Mbps	15.0 +/- 1.5	-75.0
2.4 GHz – 802.11n HT20
MCS0/8	17.0 +/- 1.5	-90.0
MCS7/15	14.0 +/- 1.5	-72.0
2.4 GHz – 802.11n HT40
MCS0/8	15.0 +/- 1.5	-88.0
MCS7/15	13.0 +/- 1.5	-69.0
5 GHz – 802.11a
6 Mbps	17.0 +/- 1.5	-91.0
54 Mbps	13.0 +/- 1.5	-73.0
5 GHz – 802.11n HT20
MCS0/8	16.0 +/- 1.5	-89.0
MCS7/15	12.0 +/- 1.5	-71.0
5 GHz – 802.11n HT40
MCS0/8	14.0 +/- 1.5	-86.0
MCS7/15	11.0 +/- 1.5	-67.0

Note: This table shows the maximum capability of the hardware. The transmit power may be reduced to comply with local regulatory requirements.

Ordering Information for the Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch.

Part Number	Description
WAP351	Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch
WAP351-A-K9	Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (U.S., Canada, Mexico, Australia/New Zealand)
WAP351-C-K9	Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (China)
WAP351-E-K9	Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch (ETSI)
SB-PWR-48V-xx	Cisco 48V Power Adapter
SB-PWR-INJ2-xx	Cisco Gigabit Power over Ethernet Injector-30W

Cisco Limited Lifetime Warranty for Cisco Small Business Products

Cost-Effective Wired and Wireless-N Connectivity

Boost productivity with the Cisco WAP351 Wireless-N Dual Radio Access Point with 5 Ports Switch. This business-class access point offers 802.11n dual-radio connectivity and concurrent dual-band radios, and has a switch with 5 Gigabit Ethernet ports. The WAP351 is an ideal, lower-cost solution for hospitality, conference rooms, or classroom deployments.

Features and Capabilities

The WAP351 provides speeds up to 300 Mbps to help businesses increase productivity and run new business applications. The power-device (PD) port (power in) allows the access point to be powered by a backbone switch, and the power-sourcing-equipment (PSE) port (power out) allows the access point to power an IP device. The WAP351 advanced features will help simplify the deployment of wired and wireless devices.

Among its benefits, this access point:

Provides cost-effective dual-band 802.11n connectivity for 2.4-GHz and 5-GHz clients
Offers a 5-port GE for connecting multiple devices with PD and PSE support
Has a captive portal for highly secure guest access with customized roles and rights
Comes with a Limited Lifetime Hardware Warranty for peace of mind

Cisco WAP351 also simplifies deployment:

Offers single-point setup requiring no controller for easy, cost-effective deployment of multiple access points
Works right out of the box with easy installation and simple web-based configuration and wizard

Specifications at a Glance

Concurrent dual-band radio supporting up to 300 Mbps per radio for optimal capacity and coverage
Single Point Setup, a controllerless technology
Comprehensive security, including WPA2, 802.1X with RADIUS secure authentication, and rogue-access-point detection
Captive portal for highly secure, customized guest access
5- Port Gigabit Ethernet LAN Switch supporting both PD and PSE, allowing IP devices and the AP to be powered by a backbone switch
Sleek design with multiple internal antennas and versatile mounting kit for installation on a ceiling, wall, or desktop

Оставьте свой отзыв о данной продукции и
получите скидку 1-3% на следующую покупку